FLIR GF300 a Gas Imaging Camera

  • flir gas imaging gf309
test

Available as:

  • Rent
  • Sell

The GF Camera systems are available to hire to qualified ITC GF Course trained persons.


Submit your enquiry or call us to discuss your requirements at +44 (0) 1224 789692

Description

Optical gas imaging cameras from FLIR can visualize and pinpoint gas leaks that are invisible to the naked eye. With an optical gas imaging camera it is easy to continuously scan installations that are in remote areas or in zones that are difficult to access.

Continuous monitoring means that you will immediately see when a dangerous or costly gas leak appears so that immediate action can be taken. Optical gas imaging (OGI) cameras are widely used in industrial settings, such as oil refineries, natural gas processing plants, offshore platforms, chemical/ petrochemical complexes, and biogas and power generation plants.

OGI cameras like the FLIR G300 a can detect harmful VOC’s (volatile organic compounds) that can seriously harm the environment.

Features

Cooled detector makes the smallest temperature differences visible

FLIR G300 a contains a cooled Indium Antimonide (InSb) detector that produces thermal images of 320 x 240 pixels. With its low F-number and high sensitivity, G300 a detects the smallest of leaks.

The high sensitivity mode further enhances the detection level of the camera so that the smallest gas leaks can be detected.


Easy to control

All models are easy to control from a safe distance. They can be fully controlled over Ethernet. They can easily be integrated in a TCP/ IP network.


Available lenses

The FLIR G300 a is available with a 23 mm (FOV: 24° × 18°) or 38 mm (14.5 x10.8) lens. Longer lenses give you a narrower field of view so that you can detect gas leaks from further away.


FLIR G300 a detects the following gases:

Benzene, Ethanol, Ethylbenzene,Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, m-xylene, Butane, Methane, Propane, Ethylene and Propylene.